An N-state partitioned survival model (PSM) simulates the probability that a patient is in each of N distinct health states at a given point of time when treated by a particular therapy. State membership is estimated from a set of non-mutually exclusive survival curves; for an N-state model, N-1 survival curves are required.

The cumulative survival function, \(S_n(t)\), represents the probability that a patient survives to health state \(n\) or to a lower indexed state beyond time \(t\). The probability that a patient is in health state 1 is always just \(S_1(t)\). State membership in health states \(2,\ldots, n-1\) is calculated as \(S_{n}(t) - S_{n-1}(t)\). Finally, the probability of being in the final health state \(N\) (i.e., the dead state) is \(1-S_{N-1}(t)\), or one minus the overall survival curve.

In `hesim`

, an N-state PSM consists of three types of separate statistical models: a set of N-1 survival models, a model of the utility values to assign to each health state, and a set of models for costs to assign to each health state. Multiple cost models can be used to categorize costs into different categories (e.g., costs of medical care, drug costs). All models can either be fit using R or constructed with external data.

Separate survival curves as a function of time, \(t\), are predicted for each treatment strategy \(k\) and patient \(i\) as a function of \(L\) parameters, \(\alpha_l\), which can depend on covariates, \(x_l\) (see `params_surv()`

for more details),

\[ \begin{aligned} S_{n}(t|\alpha_{1n}(x_{1n, ik}), \ldots, \alpha_{Ln}(x_{Ln, ik})). \end{aligned} \] Quality-adjusted life-years (QALYs) and total costs associated with a given health state for a given treatment strategy and patient are calculated by integrating the “weighted” probability of survival, where weights are a function of the discount factor and predicted state values. Letting \(h\) index a health state, QALYs and total costs for the \(m\)th cost category are calculated as,

\[ \begin{aligned} \rm{QALYs}_{hik} &= \int_{0}^{T} q_{hik}(t) e^{-rt} p_{hik}(t)dt, \\ \rm{Costs}_{m,hik} &= \int_{0}^{T} c_{m,hik}(t) e^{-rt} p_{hik}(t)dt, \end{aligned} \] where \(q_{hik}\) is a quality-of-life weight, \(c_{m,hik}\) is (assuming that time is measured in years) annualized costs, \(r\) is the discount rate, and \(p_{hik}(t)\) is the probability of being in a given health state at a given time, and QALYs and costs are calculated over \(T\) time periods.

To illustrate a partitioned survival analysis, consider the evaluation of a two-line sequential treatment strategy in oncology using a 4-state PSM. The 4 health states might be:

- Progression free on first line treatment
- Progression free on second line treatment
- Progressed on second line treatment
- Death

We begin by defining the population, treatment strategies, and model structure. In this example, we model three treatment strategies, three distinct patients (that differ in age and gender), and four health states (death and three non-death states). This information is combined using `hesim_data()`

, which creates a general object of class `hesim_data`

.

```
library("data.table")
library("hesim")
set.seed(101)
<- data.table(strategy_id = c(1, 2, 3),
strategies strategy_name = paste0("Strategy ", 1:3))
<- data.table(patient_id = seq(1, 3),
patients age = c(45, 50, 60),
female = c(0, 0, 1))
<- data.frame(state_id = seq(1, 3),
states state_name = c("Progression free (1st line)",
"Progression free (2nd line)",
"Progressed (2nd line)"),
stringsAsFactors = FALSE)
<- hesim_data(strategies = strategies,
hesim_dat patients = patients,
states = states)
print(hesim_dat)
```

```
## $strategies
## strategy_id strategy_name
## 1: 1 Strategy 1
## 2: 2 Strategy 2
## 3: 3 Strategy 3
##
## $patients
## patient_id age female
## 1: 1 45 0
## 2: 2 50 0
## 3: 3 60 1
##
## $states
## state_id state_name
## 1 1 Progression free (1st line)
## 2 2 Progression free (2nd line)
## 3 3 Progressed (2nd line)
##
## attr(,"class")
## [1] "hesim_data"
```

We use `get_labels()`

to obtain nice labels for plots and summary tables.

```
<- get_labels(hesim_dat)
labs print(labs)
```

```
## $strategy_id
## Strategy 1 Strategy 2 Strategy 3
## 1 2 3
##
## $state_id
## Progression free (1st line) Progression free (2nd line)
## 1 2
## Progressed (2nd line) Death
## 3 4
```

The parameters of the survival models would typically be estimated in one of two ways. First, if access to patient level data from a clinical trial were available, survival models would be fit using available R packages. Second, a formal evidence synthesis—such as a network meta-analysis—might be conducted. Here, we provide an example of an analysis with trial level data.

We consider an estimation dataset (`surv_est_data`

) with three survival endpoints with endpoint 1 denoting the lowest indexed state, endpoint 2 the next indexed state, and endpoint 3 representing overall survival. In our example, endpoint 1 represents progression on 1st line treatment, endpoint 2 represents progression on 2nd line treatment, and endpoint 3 represents death.

Survival models in `hesim`

can be fit using either `flexsurvreg`

or `flexsurvspline`

from the `flexsurv`

package. `hesim`

currently supports parametric (exponential, Weibull, Gompertz, gamma, log-logistic, lognormal, and generalized gamma), splines, and fractional polynomial survival models (see params_surv). In this example, we fit a Weibull model to each of the three survival endpoints.

```
library("flexsurv")
<- psm4_exdata$survival
surv_est_data <- flexsurvreg(Surv(endpoint1_time, endpoint1_status) ~ age + female +
fit1 factor(strategy_id),
data = surv_est_data,
dist = "weibull")
<- flexsurvreg(Surv(endpoint2_time, endpoint2_status) ~ age + female +
fit2 factor(strategy_id),
data = surv_est_data,
dist = "weibull")
<- flexsurvreg(Surv(endpoint3_time, endpoint3_status) ~ age + female +
fit3 factor(strategy_id),
data = surv_est_data,
dist = "weibull")
<- flexsurvreg_list(fit1, fit2, fit3) psfit_wei
```

Although utility and cost models can be fit using regression models, in many cases, we won’t fit a model directly, but will use estimated mean values from published sources. In this case, we can use a `stateval_tbl()`

to store estimates. For instance, consider an example where we are only given a range of values for utility and we therefore approximate the posterior distribution of mean utility values by health state using a uniform distribution.

```
<- stateval_tbl(tbl = data.frame(state_id = states$state_id,
utility_tbl min = psm4_exdata$utility$lower,
max = psm4_exdata$utility$upper),
dist = "unif")
```

Similar to utility, we will not simulate drug costs based on a statistical model but will instead use published estimates. Drug costs will only vary by treatment strategy (i.e., they do not vary by health state or across samples in the PSA).

```
<- stateval_tbl(tbl = data.frame(strategy_id = strategies$strategy_id,
drugcost_tbl est = psm4_exdata$costs$drugs$costs),
dist = "fixed")
```

For cases in which we want to use a regression model to simulate costs, `hesim`

supports parameterizing a cost or utility model using linear models. Here, we fit a model for medical costs as a function of the three non-death health states using the `lm()`

function in R.

`<- lm(costs ~ female + state_name, data = psm4_exdata$costs$medical) medcosts_fit `

A PSM in `hesim`

is an R6 object of class `Psm`

and comprises of three separate submodels: (1) a set of survival models for generating survival curves (of class `PsmCurves`

), (2) a utility model (of class `StateVals`

), and (3) a set of cost models for each cost component (a list of `StateVals`

objects). Since analyses in `hesim`

are, by default, based on sampled values of the parameters from their joint posterior distribution in order to facilitate probabilistic sensitivity analysis (PSA), we will specify the number of sampled parameter sets that are desired.

`<- 100 n_samples `

Survival curves are simulated using `PsmCurves`

objects. We can create a `PsmCurves`

object using `create_PsmCurves()`

as a function of our fitted Weibull models and input data describing the target population and treatment strategies.

To conduct the PSA, we must sample random draws of the regression coefficients from suitable probability distribution, which can be done in one of two ways. First, the parameters of each survival model can be sampled separately using a multivariate normal distribution. However, this option does not preserve the correlation in the survival endpoints. By default, `create_PsmCurves()`

consequently samples the parameters via bootstrapping, whereby the survival models are refit repeatedly to resamples of the estimation dataset.

```
<- expand(hesim_dat, by = c("strategies", "patients"))
surv_input_data <- create_PsmCurves(psfit_wei, input_data = surv_input_data, n = n_samples,
survmods uncertainty = "bootstrap", est_data = surv_est_data)
```

Utility and cost values are simulated using models of class `StateVals`

. We can instantiate a `StateVals`

object from a ’stateval_tbl` object, which creates a “mean model” that predicts mean state values for each treatment strategy, patient, and health state combination. In the utility model, utility only varies across health states and is constant within patients and treatment strategies conditional on health state.

`<- create_StateVals(utility_tbl, n = n_samples, hesim_data = hesim_dat) utilitymod `

We take a similar approach for drug costs, in which costs only vary across treatment strategies.

`<- create_StateVals(drugcost_tbl, n = n_samples, hesim_data = hesim_dat) drugcostmod `

Finally, we can also instantiate a `StateVals()`

from a fitted linear model and a corresponding dataset of class `expanded_hesim_data`

.

```
<- expand(hesim_dat, by = c("strategies", "patients", "states"))
medcost_data <- create_StateVals(medcosts_fit, input_data = medcost_data,
medcostmod n = n_samples)
```

The PSM model is instantiated using `$new()`

.

```
<- Psm$new(survival_models = survmods,
psm utility_model = utilitymod,
cost_models = list(medical = medcostmod,
drug = drugcostmod))
```

Survival curves are predicted by treatment strategy and patient with the function `$sim_survival()`

. We can quickly generate a plot of survival curves (averaged across patients) by treatment strategy using `autoplot.survival()`

.

```
# Simulate
<- seq(0, 12, by = .1)
times $sim_survival(t = times)
psmhead(psm$survival_)
```

```
## sample strategy_id patient_id grp_id curve t survival
## 1: 1 1 1 1 1 0.0 1.0000000
## 2: 1 1 1 1 1 0.1 0.9189061
## 3: 1 1 1 1 1 0.2 0.8411512
## 4: 1 1 1 1 1 0.3 0.7688137
## 5: 1 1 1 1 1 0.4 0.7019982
## 6: 1 1 1 1 1 0.5 0.6405107
```

```
# Plot
library("ggplot2")
$curve <- c("Curve 1" = 1, "Curve 2" = 2, "Curve 3" = 3)
labsautoplot(psm$survival_, labels = labs,
ci = TRUE, ci_style = "ribbon") +
scale_x_continuous(breaks = seq(0, max(times), 2))
```

After simulating survival, we can calculate the probability of being in each of the four health states using `$sim_stateprobs()`

. At a given point in time, the probability of being in state 1 is the survival probability from the first survival curve, the probability of being in state 2 is the difference in survival probabilities between the 2nd and 1st curves, the probability of being in state 3 is the difference in survival probabilities between the 3rd and 2nd curves, and the probability of death is 1 minus the survival probability from curve 3.

While plots can be quickly generated with `autoplot.stateprobs()`

, the output is returned in a tidy format (and stored as a field in the class named `stateprobs_`

) that facilitates creation of custom plots. We’ll plot state probabilities for the 1st patient with the 30th randomly sampled parameter set.

```
# Simulate
$sim_stateprobs()
psmhead(psm$stateprobs_)
```

```
## sample strategy_id patient_id grp_id state_id t prob
## 1: 1 1 1 1 1 0.0 1.0000000
## 2: 1 1 1 1 1 0.1 0.9189061
## 3: 1 1 1 1 1 0.2 0.8411512
## 4: 1 1 1 1 1 0.3 0.7688137
## 5: 1 1 1 1 1 0.4 0.7019982
## 6: 1 1 1 1 1 0.5 0.6405107
```

```
# Plot
<- psm$stateprobs_[sample == 30 & patient_id == 1]
stateprobs := factor(state_id,
stateprobs[, state levels = rev(unique(state_id)))]
:= factor(strategy_id, labels = names(labs$strategy_id))]
stateprobs[, strategy ggplot(stateprobs[strategy_id %in% c(1, 2, 3)],
aes(x = t, y = prob, fill = state, group = state)) +
geom_area(alpha = .65) + facet_wrap(~strategy) +
xlab("Years") + ylab("Proportion in state") +
scale_fill_manual(name = "Health state",
values = c("gray92", "green4", "orange", "purple"),
labels = c("Death",
rev(hesim_dat$states$state_name))) +
scale_x_continuous(breaks = seq(0, max(times), 2)) +
guides(fill = guide_legend(reverse = TRUE,
nrow = 2, byrow = TRUE)) +
theme(legend.position = "bottom")
```

Finally, we can simulate discounted costs and QALYs by numerically integrating the “weighted” probabilities in `$stateprobs_`

as described above. Costs and QALYs are produced for each treatment strategy, patient, health state, and sampled parameter set.

```
# Costs
$sim_costs(dr = .03)
psmhead(psm$costs_)
```

```
## sample strategy_id patient_id grp_id state_id dr category costs
## 1: 1 1 1 1 1 0.03 medical 28970.47
## 2: 1 1 1 1 2 0.03 medical 24915.15
## 3: 1 1 1 1 3 0.03 medical 25025.80
## 4: 1 1 2 1 1 0.03 medical 27635.74
## 5: 1 1 2 1 2 0.03 medical 23878.54
## 6: 1 1 2 1 3 0.03 medical 23333.87
```

```
# QALYs
$sim_qalys(dr = .03)
psmhead(psm$qalys_)
```

```
## sample strategy_id patient_id grp_id state_id dr qalys lys
## 1: 1 1 1 1 1 0.03 0.8913423 1.0479377
## 2: 1 1 1 1 2 0.03 0.5448242 0.7391230
## 3: 1 1 1 1 3 0.03 0.5277850 0.7778092
## 4: 1 1 2 1 1 0.03 0.8502762 0.9996569
## 5: 1 1 2 1 2 0.03 0.5221563 0.7083712
## 6: 1 1 2 1 3 0.03 0.4921027 0.7252234
```

A cost-effectiveness analysis can be performed with the `cea()`

and `cea_pw()`

functions after using the `$summarize()`

method to create a `hesim::ce`

object with mean costs and QALYs computed for each PSA sample. Details are provided in the cost-effectiveness analysis vignette.

```
<- psm$summarize()
ce_sim <- cea(ce_sim, dr_qalys = .03, dr_costs = .03)
cea_out <- cea_pw(ce_sim, comparator = 1, dr_qalys = .03, dr_costs = .03) cea_pw_out
```